The manufacturer of the FRITZ!Box AVM currently released a new lab firmware for FRITZ!OS 7.39-96136 for the FRITZ!Box 7530. With the new edition routines can be made, activated and deactivated. For case in point, with the circumstance Back again residence Set all radiator controls to comfort and ease temperature at the contact of a button and at the exact same time switch on all LED lamps and sockets, WLAN or guest WLAN and answering device. the two eventualities Back again house Y Leaving residence they are predefined and can be utilized specifically. The two predefined eventualities consist of immediately created templates that can be chosen and deselected later on as required. Also new is the enlargement of the template for radiator controllers with consolation and temperature reduction features as well as frost protection and boosting. There are also numerous bug fixes, improvements and improvements, which can be observed under. The update to FRITZ!OS 7.39-96136 for the FRITZ!Box 7530 can now be downloaded and examined from AVM. As a person of the lab model, you can down load the update by using the FRITZ!Box user interface. Open up the FRITZ!Box › Enter fritz.box in the browser and log in › Click on Wizards › Update › Start off the update by clicking Research for a new FRITZ!OS and adhere to the guidelines to get the new FRITZ!OS. Additional facts on this update can be discovered beneath or on AVM.
Download -> Obtain FRITZ!OS 7.39-96136 for FRITZ!Box 7530
The new firmware is available for obtain at the subsequent AVM web site:
- Down load FRITZ!OS 7.39-96136 for the FRITZ!Box 7530
Interest: This lab firmware is only appropriate for the FRITZ!Box 7530!
Internet site -> https://avm.de/fritz-labor/
New capabilities of FRITZ!OS 07.39-96136 for the FRITZ!Box 7530
smart home ->
- NEW: Develop and activate/deactivate routines (much more about this).
- NEW: Growth of the template for radiator controllers with convenience and lessened temperature features, as perfectly as antifreeze and raise.
More improvements of FRITZ!OS 07.39-96136 for FRITZ!Box 7530
- Enhancement: Automated prioritization makes sure reasonable bandwidth distribution across the complete FRITZ!Box community (dwelling and guest network) (7590, 7590 AX, 7530, 7530 AX, 7520, 7510 only) (a lot more about this).
- Advancement: Visualization of the info flow of the IPv6 guest network in the “On-line Monitor”.
- Mounted: Under certain situation, the initiator of a 3-way conference could not hear the other two individuals.
residence community ->
- Improvement: Expanded “Mesh Summary” display screen to involve LLDP switches.
sensible dwelling ->
- Enhancement: astronomical timer.
- Modifying “Enable & Facts” at the finish of the menu area summarizes beneficial details about the FRITZ!Box.
New advancements in FRITZ!OS 7.39-96136 for the FRITZ!Box 7530
- Preset: Alternately configured DNS servers were not regarded for WireGuard VPN connections.
- Mounted: In the case of a FRITZ!Box with its personal IP tackle vary and its own firewall on an exterior modem or router, the IPv6 tackle was not up-to-date in MyFRITZ!Internet.
- Preset: Community conflicts happened with parallel WireGuard VPN connections from 1 device to two linked FRITZ!Box solutions.
- Fastened: Title resolution by configured DNS servers could be afflicted with active guidance for general public DNS servers.
- Fastened: FRITZ!Packing containers in repeater mode had been incorrectly registered when the PMF (protected management frameworks) possibility was activated.
- Fastened: Messages about WPS position in “Technique/Occasions” did not always look.
- Fastened: A achievable error situation with parallel activation of WPS (“session overlap”) in primary and visitor accessibility was not acknowledged.
- Mounted: Modifications on the “WLAN / radio channel” website page were being not generally approved.
- Fixed: WPS started off via UI could not be canceled by clicking “Terminate”.
- Transformed the structure and style and design of numerous places in the “WLAN” menu.
- Changed the layout and style of quite a few regions in the WLAN menu.
dwelling community ->
- Set: Beneath certain circumstances, identify changes had been displayed for the mesh grasp in the mesh.
- Fixed: Immediately after enhance, community devices Laptop-00-00-00-00-00-00 ended up displayed improperly.
- Transform Altered the width of the UI information region.
Notes on the lab update for the FRITZ!Box
This FRITZ! The lab variation has beta position. It was examined in standard environments ahead of release, but it can also induce malfunctions. AVM assumes no responsibility for any hurt resulting from the use of this version. You can change the FRITZ!Box again to the formal FRITZ!OS employing the restoration.exe file involved in this lab deal.
Be aware: To use the new functions, use a web browser that supports HTML5, for example, the existing variations of Chrome, Edge, or Firefox.
Professional bacon fanatic. Explorer. Avid pop culture expert. Introvert. Amateur web evangelist.